Anden Grow-Optimized Industrial Dehumidifier, 210 Pints/Day 240v

Anden Grow-Optimized Industrial Dehumidifier, 210 Pints/Day 240v

SKU: DHA210V1
$3,332.95
Out of Stock

Quick answer

Anden Grow-Optimized Industrial Dehumidifier, 210 Pints/Day 240v is best evaluated by room size, plant count, watering volume, temperature, target humidity, and drain setup.

Best fitRooms or tents where humidity control must match the actual water load, not only the square footage.
Check before orderingConfirm voltage, drain setup, hanging or floor placement, controller needs, dimensions, and service clearance.
Grower tipCall Toledo Indoor Garden before buying if you are unsure about sizing. We can help avoid undersizing or overbuying.

Shopping guidance from Toledo Indoor Garden. Prices, availability, shipping rates, weights, and dimensions are verified during checkout.

Description

Anden Grow-Optimized Industrial Dehumidifiers

210 Pints Per Day. Anden A210V1 Dehumidifier is designed and built for grow, with materials proven to perform in the extreme conditions of the grow room environment. Utilizing Anden Dehumidifiers for your grow facility will help you achieve your desired humidity balance for maximum growth potential.


Better. Removes up to 3 liters per kilowatt hour, for maximum energy efficiency.
Faster. Quickest commercial dehumidifier to reach peak power for maximum moisture removal.
Smarter. Most intelligent dehumidifier in its class, with on-board and remote monitoring, sensing & diagnostics.

Anden advanced features:

  • Positive pressure drain allows proper drainage without the need for a drain trap, providing for trouble free operation
  • Self-sealing air filter for efficient protection of components; with easy access for replacement
  • Included hanging kit doubles as lifting handles, provides easy, flexible installation
  • Pre-installed electrical plug is easily removable for hard wired application, providing flexible installations
  • Float switch terminals for easy set-up
  • 76 remote control communicates with the dehumidifier, relaying all diagnostics from the dehumidifier to the control display; simple to monitor

Whether you are starting seedlings, rooting cuttings or drying, humidity control is critical. Humidity rising above 60% can lead to molds, mildews, and other unwanted biological growth. High humidity can also prevent plants from properly taking in CO2, preventing efficient photosynthesis. Anden helps create an environment that drives transpiration at an optimal rate, while helping prevent disease outbreaks.

210V1 SPECS:
Capacity:
210 PPD
Energy Factor: 3.0 L/kWh / 6.3 pints/kWh
Voltage: 208–240VAC, 1 Phase, 60 Hz
BTU: 2,036
Current draw (amps)(1): 7.15
Power (watts)(1): 1,487
Weight: 118 lbs.
Width: 19½" - Height: 18¾" - Length: 30⅛"
Warranty: 5 Years on all parts


INCLUDED ITEMS:

  • Dehumidifier
  • Filter
  • Leveling Feet
  • Hanging Brackets
  • A76 Control
  • Drain Fitting
  • Drain Tubing
  • Thermostat wire
  • Screw driver
  • Dehumidifier
  • 1487W wattage output
  • Genuine Anden product
  • Brand: Anden
  • Category: Climate Control > Dehumidifiers
  • Listed weight: 118 lbs

Specifications

SKUDHA210V1
BrandAnden
UPC686720021015
Weight118.00 lbs
Dimensions30.13 x 19.5 x 18.75 in
TypeDehumidifier
Pints/Day210 pints/day
CFM525 CFM
Voltage240V
Amps7.15A
MERV RatingMERV 11
Wattage1487W
Pints210
Cfm540
Voltage208-240V
Amps10.4A
Coverage3000-6000 sq ft
Efficiency2.8 L/kWh
FilterMERV 11
DrainPositive pressure
Warranty5 years
TypeIndustrial Dehumidifier
ModelA210V1
Capacity Pints Day210 Pints/Day
Amperage7.1 A
Power Watts1,450 W
Operating Temp50°F – 104°F
Merv RatingMERV 11
RefrigerantR410A
Drain Port3/4" Threaded MNPT
Part NumberA210V1
Dehumidifier TypeRefrigerant
Power CordSJT, 6-15P
Specs Sourceanden.com / hydrobuilder.com
Capacity3.0 L
ShippingOversized shipping review

Need Help?

Call us for expert advice:

419-725-2450

Mon-Fri: 9AM-6PM | Sat: 10AM-6PM | Sun: Closed