Blumat Sensors - Pre-Marked

BuildASoil + Blumat = Freedom Now Pre-Marked to eliminate install hassle.

This is the simplest it’s ever been.

We prefer to use the 9" Sensor as it's the most functional to be used at shallow or deep depths.

Easy to adjust using 2.5mm Hex Key The Tropf-Blumat Maxi acts as a regulator and dripper, just like the standard 5” Tropf-Blumat.

This one is 9 inches long though.

You put it in the ground 6 - 7.5 inches so it senses the moisture at a deeper level.

This is important when your plants get bigger because the regular Blumat sensor might turn the water off too soon.

This one might turn it off too soon if your plant still has surface roots.

Some growers use both - especially if they are growing in coco or a hydroponic system.

The Tropf-Blumat (Drip-Blumat) is a sensor that supplies plants with drips of water via thin tubing.

As the soil dries, its natural suction power triggers the opening of the Tropf Blumat allowing the water to flow.

When the soil is sufficiently moist, the Tropf Blumat automatically stops.

The system functions fully automatically.

Every plant, every container or group of plants requires at least 1 Tropf-Blumat adjusted to the individual needs of the plant.

Larger containers or surfaces require longer or more than one sensor.

All Tropf-Blumats are connected using one supply tube, this allows for flexibility in the layout and is changeable at any time.

Automatically waters individual plants and only when needed.

There are a few options for a water source; you can either connect the system directly to your hose tap or rain barrel (with fittings not supplied with this product).

Weight: 0.35 lbs.

Dimensions: 8 x 5 x 3 in.